The water is deeper than about an inch
To keep the incident under control, about an inch is the practical ceiling for a wet vacuum, and that is for clean water.
Clean, gray, and contaminated water
Oklahoma
Our incident command team extracts sewage water, removes unsalvageable materials, and cleans and sanitizes the area inside the incident zone before structural drying.
Signs to look for
As the coordinated steps continue, if you notice any of these problems, call us before water has more time to spread into nearby materials.
To keep the incident under control, about an inch is the practical ceiling for a wet vacuum, and that is for clean water.
From the first status check, toilet paper, wipes and waste solids clog a standard submersible pump within minutes.
With the scene stabilized, if the route from the wet zone to the door runs over carpet, wood or a living room, the removal is the moment contamination spreads.
As the coordinated steps continue, the question of where the water goes is settled before extraction starts, not during.
As the coordinated steps continue, removing water from a space that is still receiving it wastes the effort.
From the first status check, low clearance spaces have no floor drain, poor access and a vapor barrier that traps liquid in pockets.
What happens
Our incident command team adjusts the work to which materials took on water, how far the water traveled, and which materials can be saved.
As the coordinated steps continue, power to the area is switched off from a dry location before a crew enters.
With the scene stabilized, we identify where the contaminated water is going first.
From the first status check, before anything is carried out, the route from the wet zone to the truck is covered with sheeting or corrugated floor protection and marked as one way.
From the first status check, the area inside the incident zone is closed off and a doffing station is set at the edge, where personal protective equipment comes off and goes into sealed waste bags.
From the first status check, clear liquid can be moved with a submersible pump, while water carrying solids needs a trash pump or a solids handling pump that will pass debris.
With the scene stabilized, once the depth is below what a pump can lift, extraction moves to a truck mounted extractor or a self contained unit with a sealed waste tank.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
From the first status check, here is how we usually handle sewage water removal near Oklahoma.
From the first status check, depth and whether there are visible solids decide which pumps come on the truck.
Your callAs the coordinated steps continue, all water use in the building stops, including anything on a timer such as a washing machine or a water softener.
+5 minutesAs the coordinated steps continue, young children, pets, older adults and anyone whose immune system is compromised stay clear of the affected space and of the route out.
+10 minutesWith the scene stabilized, do not use a shop vacuum, a mop or a squeegee, and do not push water toward a drive or a drain.
+15 minutesAs the coordinated steps continue, on arrival a crew measures the depth, records the conditions with photographs, and confirms where the water will be discharged or hauled.
On arrivalTo keep the incident under control, floor protection goes along the route, sealed work area closes the area inside the incident zone, and the doffing station is set at the boundary.
First hour on siteTo keep the incident under control, pumps sized for the material move the standing volume into sealed tanks or to the agreed discharge point.
First hours on siteUnderstanding the cost
As the coordinated steps continue, we explain the recommended work and price before you approve the job. As the coordinated steps continue, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Sealed extraction and disposal of sewage water, one bathroom or utility room | To keep the incident under control, national estimate for removal only. From the first status check, cleaning, disinfection and drying are separate stages. | $600 to $1,800 |
| Sealed pump out and extraction, two to four inches of sewage over a basement floor | To keep the incident under control, national estimate for removal only, including solids handling and controlled disposal. | $1,500 to $4,000 |
| Sewage water removal priced by affected area | With the scene stabilized, national estimate for contaminated water work. | $7 to $15 per square foot |
| Contaminated waste hauling to a controlled disposal point, per sealed liquid tank load | To keep the incident under control, national estimate per sealed tank load. From the first status check, distance to an approved disposal point drives the spread. | $200 to $600 |
| Standby pump plus monitoring while inflow continues, per day | With the scene stabilized, national estimate for equipment left on a float switch with return visits until the source is fixed. | $150 to $350 |
| After hours or overnight dispatch charge | From the first status check, national estimate for an out of hours start. From the first status check, you are told the figure before a crew leaves. | $100 to $400 |
Volume and depth of standing water
A shallow film over a bathroom floor is a wand job. Several inches over a basement slab is pump work with tanks and hose runs.
How much of it is solids
To keep the incident under control, liquid moves quickly and solids do not.
Distance and difficulty of the route out
To keep the incident under control, a walkout basement with a truck at the door is fast.
Where the water can legally be discharged
From the first status check, a sanitary sewer cleanout on the property, where discharge to it is permitted, is the cheapest route.
Protection of the areas we pass through
As the coordinated steps continue, sheeting, corrugated floor protection, tack mats and doorway guards are consumed on every job.
Saturated soft goods that have to be extracted before removal
To keep the incident under control, carpet and padding are extracted in place so they can be carried without dripping.
Why timing matters
From the first status check, water can keep moving into nearby materials even when the surface looks dry.
As the coordinated steps continue, boots, dripping carpet and dragged hoses carry material into hallways, stairs and living rooms.
From the first status check, storm systems usually run straight to a creek, a river or a lake with no treatment at all.
As the coordinated steps continue, it is not built for volume and it is not built for contaminated water, so it clogs, it aerosolizes what it does pick up, and it becomes contaminated equipment sitting in your garage.
From the first status check, bacterial load rises quickly in warm still water and the smell follows it.
Helpful service information
With the scene stabilized, start with the short explanation. From the first status check, open a card if you want a little more detail.
As the coordinated steps continue, contaminated liquid moves from the floor into a closed waste tank without being sprayed, aerosolized or exposed to the room.
As the coordinated steps continue, sealed extraction is the phrase that separates this work from ordinary pumping. As the coordinated steps continue, contaminated liquid moves from the floor into a closed waste tank without being sprayed, aerosolized or exposed to the room.
Contaminated water is contained and taken to controlled disposal.
Where the water goes is a decision with legal weight, and it is made before extraction starts. Contaminated water is contained and taken to controlled disposal.
The area inside the incident zone is contained and a single one way route is established, covered with sheeting or corrugated protection.
Protecting the unaffected parts of a building is a removal problem more than a cleaning problem, because removal is when material travels.
Help near you
Choose your area below, or call (855) 876-9548 and describe how the incident started.
You may also need
Our incident command team removes sewage water and damaged materials, then cleans and sanitizes affected rooms to address contamination and lingering odors.
Get a Quote: (855) 876-9548Our incident command team handles water from a blocked or failed sewer line with extraction, contamination control, material removal, cleaning, and sanitation.
Get a Quote: (855) 876-9548Our incident command team contains and removes septic backup water, disposes of contaminated materials, and cleans and sanitizes affected rooms.
Get a Quote: (855) 876-9548Our incident command team removes heavily contaminated water and damaged materials, then cleans and sanitizes affected rooms to reduce serious health risks.
Get a Quote: (855) 876-9548Our incident command team identifies, contains, and removes contaminated water, followed by cleaning and sanitation appropriate for the source and affected materials.
Get a Quote: (855) 876-9548Our incident command team contains and removes Category 3 water, then cleans, sanitizes, and disposes of materials that cannot be safely restored.
Get a Quote: (855) 876-9548Our incident command team removes standing water from floors and low areas, then checks nearby materials for unseen moisture and begins drying.
Get a Quote: (855) 876-9548Our incident command team uses pumps to remove deep standing water quickly, followed by detailed extraction and moisture checks around areas inside the incident zone.
Get a Quote: (855) 876-9548Common questions
To keep the incident under control, two reasons. As the coordinated steps continue, about an inch is the practical limit for a wet vacuum even with clean water, so it cannot handle the volume.
With the scene stabilized, to a sanitary sewer cleanout on the property where discharge to it is permitted, or hauled off in sealed tanks to a controlled disposal point.
To keep the incident under control, storm drains usually discharge straight to a creek, river or lake without treatment.
As the coordinated steps continue, pumps take what will pass and the rest is scooped and squeegeed by hand into sealed containers.
To keep the incident under control, the route from the wet zone to the truck is covered with floor protection and run as a single controlled path.
With the scene stabilized, a small hard surfaced room is usually a few hours. From the first status check, several inches over a basement floor with solids and saturated carpet commonly takes most of a day.
As the coordinated steps continue, a bathroom or utility room commonly runs 600 to 1,800 dollars nationally for removal alone.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our incident command team assess homes, businesses, and managed properties throughout Oklahoma and nearby communities.
View the area on Google Maps